Palmdale · 41843 10th St W Unit E

PS5 HDMI port repair in Palmdale

PS5 powers on but no picture? A bent or broken HDMI port is the most common cause. We remove the damaged port, clean the pads and solder in a new one, right here in Palmdale.

One-day turnaround on HDMI repairsAn HDMI port repair is a one-day job on our bench, walk-in or mail-in. Walk-in console HDMI repairs are usually done in about 1 hour 20 minutes, as long as we're not completely booked up. Shipping time is on top for mail-in. Other repairs follow our normal 2–5 business day turnaround.

A real PS5 HDMI repair from our bench

This PS5 came in with no video. The HDMI port was damaged, so we pulled the old port, cleaned the pads, soldered in a new HDMI port and tested it with picture on screen. See it on our work page.

PS5 rear panel with a damaged HDMI port before repair at Circuit Savages Palmdale
Damaged PS5 HDMI port — no video
PS5 motherboard with HDMI pads cleaned and ready for a new port
Old port off, pads cleaned
New HDMI port soldered and installed in a PS5 in Palmdale
New HDMI port soldered in

Signs your PS5 HDMI port is bad

  • Console turns on (white light) but the TV says "no signal"
  • Picture flickers, cuts out, or only works if the cable is held
  • Pins inside the port look bent, pushed in, or missing
  • The cable feels loose or the port shell is cracked after a drop or trip

Swapping cables and TV inputs is worth a try first. If that doesn't fix it, bring it in. We look at the port and the board under the microscope and give you a written quote before any soldering.

How we replace it

  • Open the console, pull the board, and inspect the port and nearby parts
  • Remove the damaged port with hot air and clean every pad
  • Solder in a new HDMI port and check each pin
  • Reassemble, clean the fan, and test picture and sound on a TV

One-day turnaround on HDMI repairs: the port swap itself is a bench job we finish in a day. We also fix PS4, Xbox Series X/S, Xbox One and Nintendo Switch HDMI and charging ports. See all console repair.

1-year warrantyOn repairs with qualified parts
$40 diagnosisWritten quote before any work
4.9 on GoogleOwner Eugene, 10 years on the bench

Getting here

We're at 41843 10th St W Unit E, Palmdale, CA 93551, open 8:30 AM–6:30 PM daily. The unit is behind a security gate, so call or text (661) 770-1589 when you arrive and we'll let you in. We take cash, Zelle, Cash App or card. Not local? Mail it in.

Questions first? Contact us, check pricing, or Start a Repair.

FAQ

How much does a PS5 HDMI port repair cost in Palmdale?

Check our pricing page or text a photo of the port to (661) 770-1589. We start with a $40 diagnosis and give you a written quote before any work.

How long does a PS5 HDMI port replacement take?

One-day turnaround on HDMI repairs. Most PS5 HDMI ports are finished within a day of reaching our bench, walk-in or mail-in. We'll give you a pickup time when you drop it off. Walk-in console HDMI repairs are usually done in about 1 hour 20 minutes, as long as we're not completely booked up. This one-day promise covers HDMI repairs; other console repairs follow our normal 2–5 business day turnaround.

Is the repair under warranty?

Yes. Repairs with qualified parts carry a 1-year warranty.

My PS5 turns on but shows no signal. Is it the HDMI port?

Often, yes. A bent or broken port is the most common cause. It can also be the HDMI chip or another board fault, which we check under the microscope before quoting.

Do I need to book ahead?

No. Walk-ins are welcome 8:30 AM–6:30 PM daily. We're behind a security gate at 41843 10th St W Unit E, so call or text (661) 770-1589 when you arrive.

What payment do you take?

Cash, Zelle, Cash App, or credit and debit cards.

Do you serve Lancaster and the rest of the Antelope Valley?

Yes. Customers come from Palmdale, Lancaster, Quartz Hill, Rosamond and across the Antelope Valley, and we accept mail-in repairs.

Popular repairs

All services · Prices · Start a repair

Call (661) 770-1589 Text a photo Start a Repair